Hey guys, let’s cut to the chase—if you’re reading this, chances are you’re either a tech newbie who just got their first batch of Standard COB Modules (shoutout to my crew, by the way—we’ve been shipping these to small manufacturers and hobbyists for 3 years straight) or someone who’s messed up installing a COB before and decided to Google “how to do this right” at 10 PM after blowing up a board. I get it. COBs are awesome—uniform light, no individual LEDs to solder, way less hassle than SMDs—but one wrong move and you’re either staring at a dead module or a fried driver, and that’s a waste of time (and money). Today, I’m walking you through the exact, step-by-step way we train every single customer who buys from us to install their Standard COB Modules. No jargon, no confusing acronyms I don’t explain, just real advice that works. Standard COB Modules

First, let’s hit the pre-install prep. I’ve seen so many people skip this and regret it. Like, last month a guy ordered 50 modules for his custom sign project and texted me at 2 AM panicking because he didn’t have thermal paste and tried mounting it double-sided tape. Spoiler: that lasted 10 minutes. COBs run hot—way hotter than regular LEDs—so they need a proper heat sink, period. If you’re using them for something small, like a under-cabinet light, a basic aluminum heat sink will work. For higher-wattage stuff (our Standard COBs go up to 50W, fyi), you need a beefier one. Before you even touch the module, grab your thermal compound, a screwdriver set, a multimeter, a driver that matches your module’s voltage and wattage, and some wire nuts or screw terminals. Pro tip: check your module’s label first—we print the exact driver specs on every box, so don’t guess. If you buy from another vendor, just make sure the driver’s output voltage is within 0.5V of the module’s rated input and it can handle 10-15% more wattage than your COB. Over-driving is how you kill these fast.
Next up, let’s talk about handling the module itself. This is the part most beginners mess up. COBs have a tiny, fragile LED chip on the back, right? If you touch it with your bare hands, the oil from your skin can cause hot spots (that’s when part of the module is way brighter than the rest and dies early) or even damage it. So wear nitrile gloves—cheap ones from the dollar store work, no need for fancy lab gloves. Also, don’t drop it. I know that sounds obvious, but these modules are small and the aluminum circuit board (the MCPCB, if you want the fancy name) bends easy. A bent MCPCB can cause uneven contact with the heat sink, which leads to overheating. If you do drop it, inspect it closely—look for cracks in the silicone cover or dents in the back plate. If you see either, send it back. No exceptions. We offer a 1-year warranty, but only if it’s installed correctly, and that includes not being a total klutz.
Okay, now the main event: mounting the module to the heat sink. This is make-or-break. Step one: clean the bottom of the module’s MCPCB and the top of the heat sink with rubbing alcohol and a lint-free cloth. Any dust or grease there will create a gap, which means worse heat transfer. Step two: apply a thin, even layer of thermal paste. Don’t glob it on—pea-sized amount, spread it with a plastic card (a credit card works) so it’s just a thin film. Too much paste is as bad as too little, because it traps air bubbles. Step three: align the module with the heat sink’s mounting holes. Most Standard COBs have 2-4 screw holes, depending on wattage. Make sure the module’s positive and negative leads are facing the right direction (we mark them + and – on the module and the box, so double-check). Step four: screw it down. Use the screws that come with the module—don’t use bigger ones, they’ll crack the MCPCB. Tighten them in a criss-cross pattern, like you’re tightening a tire, so the pressure is even. If you just tighten one side first, the module will tilt and have uneven pressure, which causes hot spots. Don’t over-tighten either—hand-tight plus a quarter turn with a screwdriver is perfect. If you strip a screw hole, we sell replacement modules for half price, so save yourself the headache.
Now, wiring time. This is where people accidentally short the module and that’s it, game over. First, let’s recap: COBs have two wires, usually red for positive and black for negative. The driver will also have positive and negative terminals. Before you touch any wires, unplug the driver from the wall. Always. I don’t care if you think the power is off—unplug it. That’s rule number one. Now, if you’re using screw terminals: strip about ¼ inch of insulation from each wire, twist the exposed copper so there are no loose strands (loose strands can short), then tighten the terminal screws to hold the wire. If you’re using wire nuts: make sure you twist them on really tight, and after twisting, give each wire a gentle pull to make sure it’s not coming loose. Also, don’t leave exposed wire hanging—tape up any loose ends with electrical tape so they don’t touch each other or the heat sink. Wait, speaking of the heat sink: make sure the wiring doesn’t touch the metal heat sink, that’s a short circuit. I’ve seen a guy do that and blow three drivers in an hour. Not cool.
Once you have the module wired up, it’s time for the test run. This is non-negotiable. Don’t just install it and call it a day. Grab your multimeter (set it to DC voltage, since most COBs run on DC) and touch the positive probe to the module’s positive lead and the negative probe to the negative lead. Turn on the driver—you should get a voltage reading that matches your module’s rated input. If it’s way off, either the driver is wrong or you wired it backwards. Double-check the + and – and test again. Now, turn the module on and let it run for 10 minutes. Feel the heat sink—if it’s too hot to hold with your bare hand for more than 2 seconds, that’s a problem. Either your heat sink is too small, or you didn’t mount the module right, or you’re over-driving it. Turn it off and fix it before you leave it unattended—overheating is a fire hazard, I’m not kidding. Last year, a customer of ours skipped the test run and his sign got hot enough to melt the double-sided tape holding it to his wall. Nobody wants that.
Wait, what about if you’re installing multiple Standard COB Modules? Like, for a big light panel? The rule there is: never parallel more than 4 modules without a separate current regulator for each, and always make sure all modules are from the same production batch (we label every batch so you can check). Parallel modules from different batches can have slightly different forward voltages, which causes some to draw more current than others and burn out early. If you’re series wiring, that’s trickier—don’t do it unless you know what you’re doing, or ask our support team. We’re happy to help with custom installs for free, no extra charge.
Let’s also hit some common mistakes we see all the time. Number one: using too small a heat sink. We get emails every week from guys saying “I used a heat sink that worked for my old 10W LED and my 20W COB is overheating.” COBs produce way more heat per watt than regular LEDs, so you need a heat sink that’s rated for at least the module’s wattage. Number two: not using thermal paste. Dude, I know it’s an extra cost, but skipping that is like driving a car with no oil. Number three: reversing the wires. A lot of COBs are polarity-sensitive—reverse them and they’ll either not turn on or blow out in 2 seconds. Always check the + and – marks. Number four: over-tightening the screws. I’ve seen a module crack because someone cranked the screw so hard it bent the MCPCB. Be gentle. Number five: not testing before final installation. If you mount it and then realize it’s not working, you have to take it all apart, which is a pain. Test first, always.
Now, let’s wrap this up with a quick recap to make sure you don’t forget anything. 1. Prep: Check driver specs, gather tools, clean work surface. 2. Handle: Wear gloves, don’t drop, no touching the chip. 3. Mount: Clean module and heat sink, apply thin thermal paste, criss-cross screw tightness. 4. Wire: Unplug power first, secure wires, no exposed strands. 5. Test: Run 10 minutes, check heat, check voltage. If you follow these steps, your Standard COB Modules will last for years—we have customers who installed ours 4 years ago and they’re still going strong.

If you have questions, or you’re ready to order some modules for your project, hit us up. We’re here to help, whether you need to pick the right driver, size the right heat sink, or troubleshoot a problem. Don’t guess—ask. That’s how you avoid the mistakes that cost time and money. Trust me, I’ve seen enough bad installs to know what works.
Customized LCM Modules References
- "COB LED Installation Best Practices", Lighting Industry Association, 2022
- "Thermal Management for High-Power LED Modules", Journal of Electronic Materials, Vol. 51, No. 8, 2022
- "Standard COB Module Specification and Installation Guidelines", Global Lighting Products Association, 2023
Yueqing Bolong LCD Technology Co., Ltd.
As one of the leading standard cob modules manufacturers and suppliers in China, we warmly welcome you to buy advanced standard cob modules made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: 2nd Flr., Bld. 6, Xixi Chenyue, Intersection of Shuanglong Street and Fengshu Rd., Jiangcun Subdistrict, Xihu District, Hangzhou, Zhejiang Province, China
E-mail: sales@lcdbetterdisplay.com
WebSite: https://www.lcdbetterdisplay.com/