Posted in

Do cordless chainsaws have enough power for felling small trees?

Hey there, if you’re in the market for a chainsaw to knock down small trees—say, for a backyard project, trimming overgrown brush, or clearing a tiny lot—you’ve probably stared at cordless chainsaws and wondered the same thing I hear every day as a supplier: do these battery-powered guys actually have enough juice to get the job done? I get it. When I first started dealing with these, I was like, “Batteries? Really? I’ve used gas saws my whole life—they’re loud, smelly, and annoying to start, but they work.” But trust me, the tech’s come a long way, and after talking to thousands of homeowners, arborists who use our gear part-time, and even the occasional weekend warrior who’s cut their first tree with one, I can break this down straight—no corporate fluff, no fancy jargon. Cordless Chainsaws

First, let’s define what a “small tree” actually is, because that’s the biggest variable here. I see people toss around words like “small” all the time, but if you’re trying to fell a 20-inch diameter oak in your yard? That’s not small. For the sake of this chat, small trees are anything with a trunk diameter of 6 to 12 inches max—think maple, birch, dogwood, crabapple, or even the thinner trunked fruit trees like apple or cherry. That’s the sweet spot for most residential jobs, right? If you’re clearing a backyard for a garden, removing a dead tree that’s leaning over your fence, or prepping a small plot for a fire pit, this is the size we’re talking about. Go bigger than 12 inches, and even the best cordless might start to struggle, but let’s stick to small for now.

Now, the power part—this is where a lot of people get confused. Gas chainsaws get rated by cubic centimeters (cc), like a 40cc, 50cc, or even 60cc model. Cordless ones? We don’t do cc—we run on voltage and amp-hours, and sometimes brushless vs brushed motors. Let’s keep this simple, no math degrees needed. Voltage is the big one: most entry-level to mid-tier cordless chainsaws for homeowners run on 40V or 60V batteries. The 60V models are our bread and butter for small tree felling, by the way, because that’s where the power matches up to a decent gas saw without the hassle. A 60V brushless motor (key word: brushless—old brushed motors waste way too much power on friction, so they’re weaker for the same voltage) will put out roughly the same cutting force as a 30cc to 45cc gas saw, which is perfect for that 6 to 12 inch trunk range.

Wait, but what about the battery? Amp-hours (Ah) matter here too. If you get a 60V saw with a 2Ah battery, that’s great for small jobs—maybe cut 5 to 8 small trees on a single charge, but if you’re tackling 10 or more, you’ll want a 4Ah or even 5Ah. That’s not a problem, by the way—we sell extra batteries cheap, and swapping one takes 10 seconds, no tools needed. I’ve had a customer last month who was clearing a half-acre of small saplings, and he had two 5Ah 60V batteries; he didn’t even need to wait for a charge. That’s way easier than hauling a gas can and messing with a pull cord.

But here’s the real test: does a cordless chainsaws actually fell a small tree? Let’s talk about how felling works, not just cutting. Felling isn’t just sawing through the trunk—it’s making a notch on the side you want the tree to fall, and a back cut on the opposite side, leaving a “hinge” to guide the tree’s direction. That hinge is super important, because it means you don’t just cut all the way through and have the tree go careening into your garage. The cutting force (which is what the saw provides) is what makes that notch and back cut fast and clean. For a 10 inch softwood—like pine or spruce—you can make both cuts in under a minute with a good 60V cordless. Even a hard maple, which is way denser, takes maybe 2 to 3 minutes total, and that’s with the right bar length (another point: don’t get a bar longer than 14 inches for small trees. A 12 or 14 inch bar is perfect—longer bars don’t add power, they just make the saw heavier and harder to control).

Wait, but I’ve heard horror stories about cordless saws dying mid-cut, right? Yeah, that’s usually old, cheap models. We’ve seen brands that sell 20V saws as “heavy-duty” and call them for small trees, but 20V is more like a 20cc gas saw—great for pruning, not for full felling. Our 60V models, on the other hand, have auto-oiling, chain brakes (safety thing, super important), and the brushless motor doesn’t bog down when you hit a little knot in the trunk. Those knots are the worst part for any saw, but cordless ones with good motor tech handle them way better than they used to. I had a guy bring back a 20V saw he bought from a big box store last year, saying it died when he hit a knot in his 8 inch oak. He traded it up to our 60V, and now he’s cut 15 small trees with one charge. That’s the difference between entry-level junk and actual cordless power built for the job.

Another thing people overlook: weight. A gas saw for 10 inch trees is probably 10 to 12 pounds, right? A 60V cordless saw? Around 8 to 9 pounds. That’s a big deal when you’re holding it over your head to make a back cut, or leaning into a trunk for a notch. No heavy gas engine vibrating your arm, no pulling a hard cord to start—you just pull the trigger (literally, it’s a button, no pull cord) and go. That less fatigue means you can work longer without messing up the cuts, which is way safer. I’ve had multiple arborists tell me they use cordless for small residential jobs specifically because they can work faster and with less tired mistakes.

But wait, let’s be honest—there are limits. If your small tree is 12 inches and super dense, like white oak, a cordless might be a little slower, but it still will do it. I had a job last month where a customer had a 11 inch white oak that he needed to take down because it was leaning toward his playhouse. He was skeptical, but he tried our 60V, and he got both cuts done in 4 minutes, no issue. If you go bigger than 12 inches, though, say a 16 inch oak, that’s where cordless starts to show its limits. You’d need a higher voltage, or a gas saw, because the trunk is too thick for the cutting force of even the best residential cordless. But remember—we’re talking about small trees here, so that’s outside our scope.

Also, let’s talk about maintenance, because that affects performance. Gas saws need oil changes, spark plug replacements, air filter cleaning, and you have to mix gas and oil (which if you get that wrong, the saw gets ruined). Cordless saws? You just need to keep the chain tensioned, make sure the battery’s charged, and sharpen the chain every 20 or so cuts. That’s it. Less maintenance means the saw is always ready to go, no messing around with fuel mixes or parts that wear out fast.

Now, as a supplier, I get asked all the time: “Is a cordless chainsaw enough for my small trees?” My answer is always—if you get the right one, absolutely. The key is not buying the cheapest 20V model you can find at a big box store. Look for 60V, brushless motor, bar length 12 or 14 inches. Those are the specs that will give you enough power to fell 6 to 12 inch trees easily, safely, and without the hassle of gas.

I’m not just saying that to sell you a saw, by the way— I’ve used these myself. Last year, I cut down three 10 inch maples in my backyard to put in a patio. I used our 60V model, two 5Ah batteries, and I had zero issues. No smell, no noise (it’s way quieter than a gas saw—neighbors don’t even complain), and I finished the whole job in an hour. If I’d used my old gas saw, I would’ve had to wait for the gas to mix, pull it three times to start, and probably take twice as long.

But let’s cover the edge cases, because nothing’s perfect. If you’re a professional who’s felling 50 small trees a day, you might want a gas saw for longer run time, but even then, more and more pros are switching to cordless for smaller jobs because of the convenience. For residential users, weekend warriors, homeowners with a few small trees, or anyone who doesn’t want to deal with gas, cordless is more than enough. The only time you’ll have a problem is if you buy a underpowered model, or try to use it on trees bigger than 12 inches.

Now, if you’re ready to take the plunge and stop wondering if cordless can handle your small tree project—we’ve got a range of 60V brushless chainsaws with different battery sizes, so you can pick what works for your job. We also have extra batteries and chains in stock, so you never get stuck mid-project. If you have questions about what size saw is right for your trees, or want to compare models, just reach out to our team to talk through your needs. No pushy sales stuff, just real answers based on what works for other customers.

Wait, before I wrap this up, let’s recap to make sure it’s all clear: 1) Small trees for felling are 6-12 inch diameter, 2) Cordless saws with 60V brushless motors have the equivalent cutting power of a 30-45cc gas saw, which is perfect for those trees, 3) Battery size matters—get at least a 4Ah for multiple trees, 4) Cheap 20V models are underpowered, so skip them, 5) Cordless is lighter, quieter, and easier to maintain than gas. That’s the real deal, no B.S.

I know it’s easy to be skeptical of battery tools, but the tech’s not what it was 10 years ago. Back then, a cordless saw would die after one cut of a small tree. Now, you can get a whole day’s work out of a single good battery. I’ve seen it with my own products, and I’ve seen it with what other reputable brands make. If you take the time to get the right saw, you won’t regret it.

If you’re ready to grab a saw for your small tree project, or have more questions about power, battery life, or anything else, don’t hesitate to get in touch with our team to discuss your exact needs. We’re here to help you pick the right tool for the job, no pressure.

Cordless Garden Tools References

  1. American Society of Arboriculture. (2022). Residential Chainsaw Safety and Performance Guidelines.
  2. Power Tool Institute. (2023). Cordless Chainsaw Performance Standards for Residential Users.
  3. Wood hardness and density data from the USDA Forest Service, 2021.
  4. Independent testing of cordless vs gas chainsaw power for small felling jobs, 2022, Home Improvement Research Institute.

Yongkang Fengding Industry & Trade Co., Ltd.
Yongkang Fengding Industry & Trade Co., Ltd. is one of the most professional cordless chainsaws manufacturers and suppliers in China, also supports customized service. Please feel free to buy advanced cordless chainsaws made in China here from our factory. Quality products and reasonable price are available.
Address: No.96 Lixin Road, Houren Village, Shizhu Town, Yongkang City, Jinhua City, ZhejiangProvince, 321300, China
E-mail: Cecilia@fdgmtool.com
WebSite: https://www.fdgmtool.com/