Posted in

What extractants are used for uranium extraction?

When we talk about uranium extraction, the conversation usually jumps to mining methods first—heap leaching, in-situ leaching, or conventional milling. But if you’re a processor looking to get uranium from leach solutions, that’s where extractants come in. As someone who’s spent 12 years in the extractants supply business, I’ve seen firsthand how the right chemical can turn a messy, low-grade leachate into a high-purity uranium concentrate, aka “yellowcake.” Most new operators think all extractants are the same, but they’re not—each one is tailored to the type of ore, the acidity of the leach solution, and the final purity you need. Let’s break down the main ones we supply, and why they matter to your process. Extractants

First, the two big categories for uranium extraction: acid-extractable systems and alkaline-extractable systems. Your choice here starts with how you leach the ore. If you use sulfuric acid (the most common for hard rock ores, especially when uranium is associated with minerals like pitchblende or carnotite), you’ll need an extractant that works in strong acidic environments. That’s where organophosphorus extractants come in—specifically di(2-ethylhexyl) phosphoric acid, or D2EHPA. We’ve been supplying D2EHPA to mines processing low-grade uranium ore for almost a decade, and it’s still the workhorse of the industry. Here’s how it works: in a sulfuric acid leachate, uranium exists as the uranyl sulfate ion, UO2(SO4)2^2-. D2EHPA reacts with that ion to form a neutral complex that dissolves in organic solvents like kerosene, which lets you separate it from other metal impurities—like iron, copper, and vanadium— that are also in the leachate.

But D2EHPA isn’t perfect on its own. It’s selective for uranium, but it can pick up other metals if the pH is off. That’s why we often recommend mixing it with another extractant, like tributyl phosphate (TBP). TBP is a neutral organophosphate, and it acts as a modifier to boost the selectivity of D2EHPA. It also helps prevent the extractant from forming a third phase—something that happens when the organic and aqueous layers don’t separate cleanly, which is a huge headache for operators. We’ve had customers tell us that switching from straight D2EHPA to a D2EHPA-TBP mix cut their impurity levels by 15% and reduced phase separation time by 20%. For a mine processing 10,000 tons of ore a day, that’s thousands of dollars in savings every month.

Now, if you’re processing ore that’s leached with alkaline solutions (usually sodium carbonate or bicarbonate, for ores with high clay content or high levels of impurities like molybdenum), you need a different set of extractants. Alkaline leachates have uranium as the uranyl carbonate ion, UO2(CO3)3^4-, which doesn’t react well with D2EHPA. Instead, we supply amine-based extractants—specifically tertiary amines like trioctylamine (TOA) and quaternary ammonium compounds (QACs). Tertiary amines work by extracting the anionic uranyl carbonate complex, forming an organic-soluble salt. Quaternary amines, on the other hand, are stronger, so they can extract uranium from more concentrated alkaline solutions.

One of the most common amine mixes we get requests for is TOA diluted in kerosene with an alcohol modifier, like isodecanol. The alcohol helps with phase separation and prevents emulsions, which are another common issue in alkaline extraction. We recently shipped a 5,000-liter drum of this mix to a mine in Wyoming that switched from TBP to TOA after they moved to alkaline leaching for their soft rock ore. Their recovery rate jumped from 78% to 92% in the first three months of using our product. That’s the kind of result that makes us proud—we don’t just sell chemicals, we supply solutions that fit your specific setup.

Wait, there’s also a newer player in the game: diamide extractants. These are a type of extractant that’s gained traction in the last 15 years, especially for extracting uranium from seawater or from spent nuclear fuel reprocessing. Diamides are less toxic than organophosphorus or amine extractants, and they’re more selective for uranium even in very complex solutions. We’ve done a lot of testing with diamide formulations for a customer looking to extract uranium from seawater—they were using traditional extractants that had low capacity, but our diamide mix let them double their uranium loading per volume of organic solvent. That’s a big deal for seawater extraction, where uranium concentrations are less than 3 parts per billion.

Of course, no extractant works in a vacuum. You have to consider the stripping step, too—that’s when you reverse the reaction and pull the uranium back into an aqueous solution to make yellowcake. For D2EHPA, you strip with a weak acid or a carbonate solution, depending on your needs. For amine extractants, you strip with a strong acid like hydrochloric or sulfuric. If your extractant is degraded (over time, acids can break down D2EHPA into mono(2-ethylhexyl) phosphoric acid, which is less effective), you need to replenish it regularly. That’s why we don’t just sell extractants—we also provide technical support to help you monitor the condition of your organic phase, adjust pH levels, and optimize your extraction circuit.

I can’t tell you how many times a new operator has called us frustrated, saying their uranium recovery is low, or their phase separation is terrible. Most of the time, the problem isn’t the extractant itself—it’s how they’re using it. For example, I had a customer in Australia a couple years back who was using D2EHPA at too low a pH, so iron was co-extracting with uranium, fouling their solvent. We walked them through adjusting their leachate pH to 1.5 instead of 0.5, and they got their recovery back up to 85% from 60%. That’s the value we bring—not just a product, but the expertise to make that product work for you.

Another thing to keep in mind is regulatory compliance. Uranium extraction chemicals are subject to strict regulations in most countries, especially if you’re dealing with radioactive materials. We make sure all our extractants meet international standards for purity and environmental safety. For example, our D2EHPA is 99% pure, with less than 0.1% of impurities that could interfere with your process. Our amine extractants are produced to minimize volatile organic compounds (VOCs), so they’re better for worker safety and meet emissions standards. A lot of suppliers cut corners on purity, but we don’t—because if your extractant has impurities, it will contaminate your uranium product, which can make it unfit for sale.

Let’s talk about what’s coming next. The demand for uranium is only going up, as countries shift to nuclear power as a low-carbon energy source. That means mines are looking for more efficient extractants, extractants that work on lower-grade ore, and extractants that are more environmentally friendly. We’ve been investing in R&D for a new generation of extractants that are biodegradable, so you can reduce the waste from your extraction process. Right now, we’re testing a new organic modifier that cuts solvent loss by 30%, which saves customers money on both chemicals and waste disposal. It’s still in the trial phase, but early results are promising.

At the end of the day, choosing the right extractant is about matching the chemistry to your operation. There’s no one-size-fits-all. If you’re leaching with acid and processing hard rock, D2EHPA with TBP is probably your best bet. If you’re doing alkaline leaching, TOA or QACs are the way to go. If you’re working with seawater or spent fuel, diamides offer better selectivity. But even if you think you know what you need, it’s worth talking to someone who knows the ins and outs of extraction—someone who’s worked with mines just like yours, who has a track record of helping operators improve their processes.

We’ve been in this business long enough to know that a good extractant supplier doesn’t just deliver a drum of chemicals and disappear. They’re there when you have a problem at 2 a.m., when your phase separation breaks down or your recovery rate drops unexpectedly. We provide 24/7 technical support, free sample testing, and custom formulations for operators with unique needs. Whether you’re a small mine just starting out or a large processor expanding your capacity, we can work with you to find the right extractant mix, adjust your circuit, and make sure you’re getting the most uranium for your money.

If you’re looking to upgrade your uranium extraction process, or if you’re just starting out and need help choosing the right extractant, don’t hesitate to reach out. We’re here to answer your questions, provide samples, and walk you through every step of the process. The right extractant can make a huge difference in your operation—let’s make sure you’re using the one that’s right for you.

Phosphorus Oxychloride References:

  1. Ritcey, G. M., & Ashbrook, A. W. (1984). Solvent Extraction of Uranium. Mining and Mineral Processing Series, Society of Mining Engineers.
  2. Cox, M. (1990). Solvent Extraction in the Process Industries. Elsevier Applied Science.
  3. Sohn, H. Y., & Wadsworth, M. E. (1979). Rate Processes of Extractive Metallurgy. Plenum Press.
  4. Navarro, R., & Alguacil, F. J. (2005). Uranium extraction from aqueous solutions by amines. Hydrometallurgy, 79(3-4), 201-219.
  5. Price, A. P., & Vera, J. H. (2011). Diamide extractants for uranium recovery: A review. Solvent Extraction and Ion Exchange, 29(6), 807-835.

Guolan New Materials (Shandong) Co., Ltd.
Guolan New Materials (Shandong) Co., Ltd. is one of the most professional extractants manufacturers and suppliers in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale bulk premium extractants at competitive price from our factory.
Address: West of Gangxi 1st Road and South of Gangcheng Road, Dongying Port Economic Development Zone, Dongying City, Shandong Province, China
E-mail: hulk@guolannewmaterial.com
WebSite: https://www.guolanchem.com/