Posted in

Do grain grinders work well with coarse grains?

Hey there, let’s cut to the chase because I get so many questions from farmers, feed mill owners, and even home bakers lately that go something like, “Do grain grinders actually work well with coarse grains?” And honestly? As a grain grinder supplier, I don’t want to just give you a generic sales pitch. I’ve seen the good, the bad, and the straight-up messy when it comes to matching grinders to coarse grains like sorghum, barley, whole corn, rye, even those tough little millets that everyone’s raving about for craft beer now. So let’s break this down like we’re chatting over a coffee (or a truck stop soda, no judgment) instead of reading a textbook. Grain Grinders

First, let’s define what coarse grains actually are, because not everyone’s on the same page here. We’re not talking about the fine wheat flour you use for cookies—coarse grains are hard, fibrous, have a lower starch content than what you’d use for ultra-fine baking, and they often have a tough outer bran layer that’s made to protect the seed. Think sorghum, which is that drought-tough grain grown a lot in the Great Plains; barley, used mostly for malting but also feed; whole corn (not the degermed stuff from the grocery store); rye, which is super fibrous; and smaller ones like teff and millets. The big thing here is their texture: they’re way less soft than wheat or oats, so they put more stress on a grinder than finer grains do. That’s where a lot of people mess up—they grab a cheap off-the-shelf grinder they saw online, throw in coarse grains, and then it clogs, gets hot, or spits out a weird, uneven mess.

Now, do grain grinders work well with these? Short answer: yes, if you pick the right grinder. But the long answer is where the real info is, because not all grinders are built equal. Let’s talk about the main types, since that’s what most people ask about. First, there’s plate grinders—those are the ones with two abrasive plates that spin against each other, crushing grain as it falls through the gap. Then there’s hammer mills, which use fast-moving hammers that beat the grain until it breaks apart. And then there’s roller mills, which use two smooth (or slightly textured) rollers that turn at different speeds to shear the grain.

I’ll be honest, hammer mills get a bad rap sometimes, but they actually work shockingly well with most coarse grains—if you get one with the right screen size. Here’s why: the hammers don’t just crush, they beat the grain, which is perfect for breaking down that tough bran on sorghum or barley. I’ve got a customer out in Kansas who runs a feed yard, and he grinds 50 tons of corn and sorghum a week with a hammer mill he bought from us, and he swears by it. The key here is the screen: if you want coarse grind, you use a bigger screen (like 3mm to 5mm holes), and if you want finer, smaller. The mistake people make is using a too-small screen for coarse grains, which makes the grinder work too hard, overheat, and wear out fast. I once had a guy call me panicking because his cheap Amazon hammer mill stopped working after grinding a single 50lb bag of barley—turns out he used a 1mm screen, which was way too fine for coarse barley.

Then there are plate grinders, which are super popular with small-batch operators, like craft brewers or home millers. Do they work with coarse grains? Again, yes, but you need to make sure they’re heavy-duty, not those tiny countertop models you see for coffee beans. A lot of the plate grinders marketed for home use are made for soft grains like wheat, so they can’t handle coarse stuff without getting clogged or the plates wearing out in a week. I had a craft brewer in Colorado hit me up last year because his $200 plate grinder couldn’t grind enough barley for his next batch—we sent him a heavy-duty plate grinder with hardened steel plates, and now he’s grinding 200lb a week no problem, and the grind is consistent, not uneven clumps. The other thing with plate grinders is that you can adjust the gap to get exactly the coarseness you want, which is a big plus for brewers, because they need a specific grind for their mashing process. Roller mills, by the way, are also great for coarse grains, especially for malting—they shear the grain instead of crushing it, which preserves more of the bran and germ, perfect for beer. But they’re less common for feed or large-scale grinding, more for specialty operations.

Now, let’s talk about the downsides, because I don’t want to sugarcoat it (salesy stuff makes me cringe). The big issue with grinding coarse grains is heat. When you crush or beat grain fast, you generate friction heat, which can damage the nutrients—especially things like vitamins and enzymes that feed animals or brewers need. Hammer mills can get pretty hot if you run them at full capacity for too long, so you need to make sure they have good ventilation. Plate grinders, if you don’t adjust the gap right, can also get hot. We build our grinders with heat-resistant parts and ventilation systems specifically for that, because that’s one of the most common complaints we hear—people grinding coarse grains and ending up with a meal that’s too warm, which isn’t good for feed (can spoil faster) or malting (kills the enzymes needed for mashing).

Another thing: wear and tear. Coarse grains are abrasive, especially the bran and the hard outer layers. So if your grinder has cheap parts, they’ll wear out fast. I see this all the time with the super cheap grinders from big box stores—their plates or hammers are made of soft steel, so after grinding a few batches of coarse grains, they’re dull, and the grind gets uneven, and you end up having to replace parts every month, which costs more in the long run. Our grinders use hardened steel for all the parts that touch the grain, so they last way longer, even with constant grinding of sorghum or barley. A customer of mine in Iowa grinds coarse corn for a dairy farm, 20 tons a day, and he’s had his grinder for three years, and he’s only had to replace one set of hammers once. That’s the difference.

Wait, let’s address a common myth: some people say “coarse grains are too hard, grinders will break.” No, that’s not true. What breaks grinders is using the wrong grinder, or overloading it, or not maintaining it. I’ve had people tell me they tried grinding whole rye with a coffee grinder and it broke, but that’s because a coffee grinder isn’t built for that, duh. If you get a grinder that’s rated for coarse grains, sized for your capacity (don’t use a small grinder for big batches), and you maintain it (clean it regularly, keep parts sharp), it will work perfectly.

Let’s also talk about use cases, because that makes it real. If you’re a small-scale home brewer making 5 gallon batches, a good heavy-duty plate grinder works great for grinding malted barley, rye, even sorghum. If you’re a mid-sized feed mill grinding 10-50 tons a day of corn and sorghum, a hammer mill with the right screen is your best bet. If you’re a malting operation, a roller mill will give you that exact coarse, even grind you need to preserve the grain’s integrity. None of these are “better” across the board, it’s just matching the grinder to what you’re doing and what grains you’re using.

I should also mention moisture content, because that’s a huge factor that a lot of people overlook. Coarse grains with too much moisture (over 14%, usually) are way harder to grind—they clump up, clog the grinder, and make uneven grinds. You need to make sure your grains are dry enough before you grind them. I tell all my customers to test the moisture with a cheap meter, and if it’s too high, let them sit out for a few days or use a small dryer. We actually include a little tip sheet with every grinder we sell about moisture levels for different coarse grains, because that’s the #1 reason people have issues, not the grinder itself.

Let me give you a quick example of a bad vs. good scenario. Bad: A guy named Jake ran a small feed operation in Nebraska, bought a cheap hammer mill online for $300, tried grinding coarse corn and barley, it clogged after 2 bags, got so hot it smelled like burnt grain, and he had to take it apart to clean it. Good: He called me, I told him to get a hammer mill rated for at least 5hp (his was 2hp, too small), showed him how to adjust the screen and check moisture, now he grinds 10 tons a week without any issues. He just left me a review last month saying it’s the best purchase he’s made for his farm in years.

So putting it all together: do grain grinders work well with coarse grains? Absolutely—when you choose the right grinder for your needs, pay attention to things like screen size, part durability, moisture content, and not trying to cut corners on cheap, underpowered models. I’ve been in this industry for 12 years, I’ve tested every type of grinder out there, and I can tell you that the right grinder will handle coarse grains like sorghum, barley, whole corn, rye, and millets consistently, efficiently, and without breaking the bank or the grinder.

If you’re still on the fence, or you’ve had a bad experience with a grinder that couldn’t handle coarse grains, hit me up to talk through your specific needs. Whether you’re grinding for feed, brewing, baking, or something else, we can help you pick the right grinder that works for your coarse grains, no sales pressure, just real advice from someone who’s been there. Don’t waste another batch of grain or money on a grinder that’s not built for what you need—let’s chat and get you set up right.

Grain Threshing References

  1. ASABE Standard S319.4: Method of Determining and Expressing Particle Size of Chopped Forage Materials by Screening, 2021.
  2. Federal Grain Inspection Service (FGIS): Grain Grinder Performance Guidelines for Coarse Grains, USDA, 2020.
  3. Malting and Brewing Science: Grain Preparation and Mashing, Vol. 1, 2nd Edition, Royal Society of Chemistry, 2019.
  4. Livestock Feed Manufacturing: Equipment Selection and Efficiency, National Research Council, 2018.

Henan Lvlon Industrial Co., Ltd.
We’re well-known as one of the leading grain crusher suppliers in China, featured by quality products and good price. Please rest assured to buy high-grade grain crusher for sale here from our factory. Welcome to view our website for more information.
Address: Unit 5, 5th Floor, Building 11, No. 18 Dongfeng Road, Jinshui District, Zhengzhou City, Henan Province.
E-mail: lvlonxu@gmail.com
WebSite: https://www.lvlonmachinery.com/